Zacurate® Pediatric Animal Theme Fingertip Pulse Oximeter, Polar Bear
The pediatric pulse oximeter is portable, non-invasive, and easy to use. The user only needs to insert a finger into the chamber to measure his/her SpO2 and Pulse Rate. It is specifically designed for children, although it is also suitable for people with small fingers.
Quick Glance at Features
- Adorable Animal Theme - Digital Pediatric Pulse Oximeter. Specifically designed for kids.
- One-Button Operation - Simple and Easy. Just put your finger into the chamber and measure your Blood Oxygen Levels (SpO2) and Pulse Rate in seconds.
- Plethysmograph - Includes plethysmography technology that indicates amount of blood flow for additional accuracy.
- OLED Screen - High quality OLED display and rotatable multi-directional display.
- Fully-Loaded Accessories - Comes with a free pouch, lanyard and 2 AAA Batteries
- Multi-Use - Made for children age 2 and up but adults with small fingers can use it too!
About the Product & Plethysmograph
Each wave corresponds to a heartbeat and the amplitude to the amount of blood detected in your blood vessels. For best results, the height of the wave amplitude should be consistent throughout as shown in the figure above. If not, you should retake your measurement and make sure that your finger is positioned right under the LED lights and sensor.
The digital pediatric pulse oximeter is small, portable, non-invasive and easy to use. The user only needs to insert a finger into the chamber to measure his/her SpO2 and Pulse Rate. It is specifically designed for children although it is also suitable for people with small fingers. It comes with an adorable animal design to make it visually pleasing and more easily accepted by children. Compared to the adult pulse oximeters, the digital pediatric pulse oximeter is also designed to be more tolerable to finger movements without compromising accuracy. In addition, the digital pediatric pulse oximeter also features plethysmography technology that indicates blood flow.
Legal Disclaimer and Warranty
Acc U Rate® is a registered trademark of USPTO. We will actively and aggressively pursue any parties who infringe on our trademark to the maximum extent allowed by the law. Beware of Imitation, Buy Original. Acc U Rate® Pulse Oximeter is designed in the USA.
Caution: This device is not intended to diagnose or treat any medical condition or disease. Content on this site is for reference purposes and is not intended to substitute for advice given by a physician, pharmacist, or other licensed health-care professional. You should not use this information as self-diagnosis or for treating a health problem or disease. Contact your health-care provider immediately if you suspect that you have a medical problem. This device is for sports and aviation only.
Beyond Med Shop offers product warranty on this item. The warranty lasts one year.
Frequently Asked Questions
Sometimes, I don't get any reading, or it takes a very long time. Is it possible my unit is defective? I believe i'm using it as instructed.
If your fingers are cold it may take a while before a reading is registered. In this instant, you can rub your hands vigorously or submerge them in warm water, to get the blood flowing, before using the oximeter. Please also ensure that your finger is fully inserted when taking the reading. FYI, it usually takes between 8-10 seconds for the oximeter get a reading. However, there is also the possibility that you might have received a defective unit.
My son/daughter is 6 weeks old. Will this device work on him/her?
With a smaller finger chamber, this device is designed for children. However, with regards to accuracy and proper usage for babies we suggest that you consult your physician.
Is the device FDA approved?
Yes, it is.
Does it fit an adult finger?
The device is intended to measure the SpO2 levels of children or any person with small fingers. If the adult in question does not have small fingers, we highly recommend purchasing other pulse oximeters. The Acc U Rate pediatric pulse oximeter was developed specifically for children given that the regular adult oximeters are too big for little fingers. With this children's oximeter, it is a better fit for tiny fingers and thus capable of giving accurate readings.
Does this item have a warranty?
The pulse oximeter for children has a 1 year product warranty. If, during this period, the product is defective we will repair and replace it at no cost.
How high does the oximeter read? (will it read over 100?)
The pulse oximeter has the ability to display oxygen saturation level of between 35% - 100%.
How long does the unit stay on?
The pulse oximeter stays on as long as you have your finger in the finger chamber. It turns off automatically within 15-20 seconds after you remove your finger.
Will this pulse ox work on infants?
This device is suitable for children 2 years old and above. For use with children younger than 2, we suggest you consult a physician.
How quick is the reading?
If the finger is placed properly in the finger chamber, it usually takes between 5-10 seconds to get a reading. Simply ensure that your finger is stationary in the chamber while you are taking the reading. Any movement will result in inaccurate readings.
How high of a pulse rate will this register? My child has a heart arrhythmia that causes high heart rates.
The CMS 500DL does not have an alarm feature. You might want to check out the CMS 500D which has the following - sound and alarm function, brightness setting; an OLED display with multi-directional display options; and the plethysmograph which is a graph that corresponds to your heart beat and pulse strength.
Is this device water resistant?
Please note that the CMS 500DL is not water resistant. In fact, in the User Manual, under "Storage & Transportation" it clearly states that you need to "guard against moisture."
How accurate is the pulse oximeter?
The pulse oximeter is very accurate. Reading accuracy is within +/- 2%.
When I bought the device months ago, it worked. I haven't used it since that time. I tried it moments ago and it didn't work. What could be the problem?
It could simply be a battery problem. Please note though that the battery placement for the oximeter is different from others, in that even though the 2 springs are on the same side, the 2 batteries are still required to be installed in opposite polarity. If this doesn't work you can contact us directly and we will provide further troubleshooting options. If we cannot get the item to work again we will provide you a replacement. All we will need is your order number. We stand 100% behind our product and will try our best to do everything to make this right for you.